 |
 |
 |
|
Sonofresco Sample Roaster (3 in 1), the latest and most rapid sample kit in the global market! It makes 3 samples at once. Your sampling time is reduced! Just enter the desired profile color number, press start and the machine takes over and shuts off when finished - maybe 13 to 15 minutes later according to color choice. Hands free during the sampling time! Your coffees will always be within the same color spectrum each sample until profile setting is changed.
We now include a removable cap for easy pour-out of the finished beans directly into your sample tray. Want a bigger amount - the pull out the divider and do an entire pound. In either case, you simply clean out the chaff collection after each roast and do it again.
What is the difference? First, it is a Sample Roaster that is an indicator of the traditional roaster using the same air flow process that is used in PROBAT and JOPER cast iron roasters. The beans swirl around horizontally or bounce (dance) a little - as they are not suspended up in the air like in a Sivetz style - as the entire purpose is to be as close to the traditional drum as possible.
Specifications:
- Height: 27 inches (660 mm)
- Width: 11 1/4 inches (286 mm)
- Depth: 19 inches (483 mm)
- Weight: 54 lbs (24.5 kg)
- Shipping Weight: 75 lbs (34 kg)
- Sample roasting configuration: Three samples between 100g-200g each
(all must be equal, 150g recommended) - One pound roaster configuration: 1.2 lbs (0.54 kg)
- Roast/cool cycle times: Between 13 and 18 minutes
- Input rating (natural gas): 27,000 BTU/hr
- Input rating (propane): 31,000 BTU/hr
- Voltage/Frequency (standard): 110 Volts/60Hz
- Voltage/Frequency (by request): 220 Volts/50Hz
The Sonofresco Sample Roaster offers and provides the most clean, even roast. This allows the insides of the bean to come alive and produce the truest taste as possible so you can make the better decisions in your buying and blending of coffee beans. How? We have created the adjustment of air flow to imitate the average drum roasting method but without picking up flavor from the drum sidewalls. The science of the air flow prevents excess air from drying out the coffee (notice the shrinkage data above) and too little air from scorching the beans - as we all know what charcoal tastes like.
Use the Sonofresco Sample Roaster for each sample roast of every bean product to know and to prove that the bean, and not the broker, is boss!
Vent Hood options are available - otherwise just run your own vent pipe to the outside world - call us for discussion and details.
Bank multiple units to increase production output.
Operating as a Sample Roaster 
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
Sonofresco Sample Roaster ( 3 in one)
- Weigh 80 to 150 grams for each of the 3 samples to be tested. Must be same weight.
- Pour same amount (80 to 150 grams) in desired chamber.
- Set desired level of roast.
- Red Dot
When heat is on, light appears in reader window.
- At the end of the cooling cycle, press start button button to get the reading in minutes and seconds for the roast cycle.
- Upon completion of roast, remove chamber from chassis.
- Clean the chaff collector for next batch. *If you wish to use only 1 lb, you simply remove the three part insert and fill the volumetric measuring can. Dump the contents, select level of roast, press start and begin the roast!
Time for the cupping session!
FEATURES
- Gas or Propane
- 120 vac/60hz, 3 amp or 230 vac/50hz, 1.5 amp
- 3 batches/hr at 1.2 lbs/batch
- Dims: 11.25" W X 19" L X 26"
- net weight: 65 lbs
|
|
|
|
|
|
|
|
|
