www.coffeetec.com

SIMPLE NEW MODEL FOOD GRADE MIXER

Slip the drum into its master holder, plug in the mixer and allow your flavoring to soak into the coffee or tea. Regardless of the absorption time, the snap-on lid will keep the flavoring inside the drum. Mix till the flavoring is into the bean - not sitting on the outside . . . even if this process takes 20 minutes. Mixer assembly can rotate a full 360 degrees for its location to load or unload. Easy to wash out the mixing drum as needed. There is a handle on the mixer that allows you to tilt the drum with the contents of the mix . . . or . . . slide the drum out and take it to the packaging area. Mixing Drum is polyethylene, FDA approved in mixing and storage.

Extra drums can be purchased.

Lid is included on base unit . . . and is optional (see scroll down options above) when ordering extra insert drums. People often like to deliver just the insert drum to the packaging department and use as a storage container while having the freedom of inserting a different drum for active mixing. Drums are easy to wash out too . . . making this a very user friendly mixing system that is as expandable as needed.

Specifications:

• Movable Pedestal Mixer net weight 120 lbs . . . shipping weight to 160 lbs to accommodate pallet
  Functioning height 65" and floor space of 25" x 36"
• 4.5 cu. ft. Polyethylene Removable Drum will hold Up to 165 lbs green coffee or 75 lbs roasted
  Remember, the other products you may be mixing could have a different bulk density.
  
• 28 Drum Rotations Per Minute for slow folding action.
• 120V, 3/4-HP Capacitor Start, High Torque, Brushless Electric Motor with Gear Box
  Also CE Certified and Approved
• Steel Tubing Frame with Front Dumping Removable Handle
• 2 Molded-In Mixing Blades
• Flat Free Wheels
• FDA Compliant Polyethylene Certified Drum for Food Industry

That removable drum is 22" x 28" standing up - and has a 17" easy access opening.

The Snap-on Lid has a molded in handle and overlapping sides - 17" x 6" and made out of the same material as the drum - just lighter.

Note: Minor assembly required - like putting on the wheels, placing the drum into position with one big bolt etc, might even take 10 minutes. If that fails, there is a full set of instructions for those mechanically challenged.

Information Handout
Download PDF